-
产品介绍
特色
产品规格
实物图片
资源
The DINAR1_K7_FMC-HPC is an active transposer card that hosts a high pin count FPGA Mezzanine Card (FMC) on a DINAR1 expansion connector. This card is intended to bridge HPC FMC cards to a DINAR1 connector. The DINAR1_K7_FMC-HPC can be used on the following DINI Group Xilinx Virtex-7 products: DNV7F4A, DNV7F2A and DNV7F1A.
As far as compatibility, FMC is a troublesome standard, so we will need to look at the FMC card you intend to use on a case by case basis. Contact us at the factory for help.
l DINAR1_K7_FMC-HPC is an active transposer card that bridges, using an FPGA, the signals between a DINAR1 expansion connector and a high pin count FMC (VITA 57.1) card:
Ø A/Ds, DACs
Ø Serial connectivity
Ø Image Processing
Ø Interface peripherals/debug
Ø And others.
l Compatible with all DINAR1 positions on the DNV7F4A, DNV7F2A, DNV7F1A
Ø Non hosted, stand-alone operation supported with external power supply.
l Active FPGA Interface: Xilinx Kintex-7 FPGA (FBG900) :
Ø 7K410T-3,-2,-2L (fastest to slowest)
Ø 7K325T-3,-2,-2L
Ø 3M ASIC gates (ASIC measure) when stuffed with Kintex-7 7K410T
l 254k flip-flop/6-input LUTs (708k total FFs)
l 3.578 Kbytes total FPGA block memory (1590, 18 kbit blocks)
l 1540, 25x18 multipliers
l Dual SEARAY GTP Expansion headers, 6-lanes with option for 8-lanes
Ø Cable option for connection to the SEARAY GTP Expansion headers on host board.
Ø PCIe, CX4, 8 SFP+ sockets or custom
l 8 DIP switches
l 8 bi-color LEDs (green/red)
l Noninvasive debug via FPGA register readback: DN_Readbacker
l FMC reference design interfaces, in Verilog, included.